The structure and application of high pressure diaphragm filter press are introduced in detail.

Cake reduction is accomplished 1. greatly reducing the cake moisture content.

2. protect the ecological environment, reduce energy consumption and reduce filtration cycle time.

3. increase the service life of the diaphragm filter press.

With the increase of filtration working pressure, the danger of generating gas pressure will also increase rapidly at the end of each filtration cycle time. Diaphragm technology believes that low-voltage filtration and high-pressure squeezing greatly prevent the generation of gas pressure. Gas pressure happens to be the primary reason for the damage of the filter plate.

The principle of high-pressure diaphragm filter press: with the help of the delivery pump, the filter cloth of the filter chamber and the special design scheme of the high-pressure diaphragm filter press can carry out the second dry squeeze filtration birthday cake filter chamber, so that the filter chamber is filled with the birthday cake and then the valve is turned off by itself, and the filter cloth is expanded and deformed according to the vapor or liquid state, thus realizing the effect of secondary extraction of filter cake and further reducing water content.

The structure of the high pressure membrane filter press is composed of three parts.

1. Sound card rack: The rack is the basic component of the high-pressure diaphragm filter press. The two sides are the driving force plate and the pulling force. The two sides are connected by the car beams. The car beams are used to support the filter plate, filter frame and pin of the filter press.

2. The filter organization system is composed of filter plate, filter structure, filter cloth and squeezing diaphragm. Both sides of the filter plate are covered by filter cloth. When squeezing diaphragm is required, the filter plate group is composed of diaphragm and back plate.

The bottom plate of the high-pressure diaphragm filter press is covered with plastic diaphragms on both sides, and filter cloths on both sides of the diaphragm. The baffle plate is a filter plate of a general filter press. The raw material enters each filter chamber from the long feed hole on the thrust plate, the solid particles are intercepted in the filter chamber because their particle diameter exceeds the diameter of the filter material (filter cloth), and the leachate is discharged from the drain hole under the filter plate. When the filter cake needs to be squeezed dry, in addition to the diaphragm, air compression or steam can be introduced from the cleaning port to flush the water in the filter cake according to the cyclone to reduce the moisture content of the filter cake.